Similar Collections


    No collections found

questions

Title
for i/o of 8255,if -----, the word is taken as a bit set/rest word

for i/o of 8255,if -----, the word is taken as a bit set/rest word


  1. D7=1
  2. D7=0
  3. D0=1
  4. D0=0
discuss
on activation of ----, 8255 loads data from the input port lines into the input buffer of that port

on activation of ----, 8255 loads data from the input port lines into the input buffer of that port


  1. STB#
  2. IBF
  3. OBF#
  4. none of these
discuss
8255 has three ----parrallel port

8255 has three ----parrallel port


  1. 8bit
  2. 16bit
  3. 32bit
  4. 64bit
discuss
in ----, bidirectional data transfer is possible

in ----, bidirectional data transfer is possible


  1. mode 0
  2. mode1
  3. mode2
  4. BSR
discuss
walkie-talkie is an example of …..serial communication

walkie-talkie is an example of …..serial communication


  1. Simplex
  2. Half duplex
  3. Full Duplex
  4. none of these
discuss
Transmission through telephone lines is an example of….serial commuincation

Transmission through telephone lines is an example of….serial commuincation


  1. Simplex
  2. Half duplex
  3. Full Duplex
  4. none of these
discuss
Asynchronous serial communication involves

 Asynchronous serial communication involves


  1. start bit
  2. stop bits
  3. character data
  4. all of these
discuss
to configure 8255 with port A output,Port B input port C lower output and port C upper input

to configure 8255 with port A output,Port B input port C lower output and port C upper input


  1. Mov al,0AFH
  2. mov al,0AEH
  3. mov Al,0CEH
  4. Mov A,0AAH
discuss
A high on ---line indicates that the buffer register is empty

A high on ---line indicates that the buffer register is empty


  1. TXRDY
  2. TXE
  3. TXC#
  4. both B and C
discuss
Adc 0808 uses ----technique

Adc 0808 uses ----technique


  1. Successive apraximation
  2. single step
  3. dual slope
  4. flash converter
discuss
the signals provided by ADC are

the signals provided by ADC are


  1. SOC
  2. EOC
  3. ALE
  4. all of these
discuss
Flash ADC consist of….converters

Flash ADC consist of….converters


  1. 2^n
  2. 2^n -1
  3. 2^n +1
  4. none of these
discuss
8253/54 has ----independent timers/counters

8253/54 has ----independent timers/counters


  1. 1
  2. 2
  3. 3
  4. 4
discuss
8253/54 timers can be programmed in---modes

8253/54 timers can be programmed in---modes


  1. 1
  2. 3
  3. 6
  4. 5
discuss
in mode 0 of 8253/54 ----disables counting

in mode 0 of 8253/54 ----disables counting


  1. gate=1
  2. gate=0
  3. wr#=1
  4. wr#=0
discuss
8253/54 has c----command that allows the user to check the count value programmed mode and current status of the counter

8253/54 has c----command that allows the user to check the count value programmed mode and current status of the counter


  1. write back
  2. write ahead
  3. read ahead
  4. read back
discuss
for mode 3 of 8253/54, if the count is odd the output will be high for---

for mode 3 of 8253/54, if the count is odd the output will be high for---


  1. 2/(n+1)
  2. (n+1)/2
  3. 2/(n-1)
  4. (n-1)/2
discuss
EOC means

EOC means


  1. End of Conversion
  2. Enable output conversion
  3. error of conversion
  4. one of these
discuss
ADC 0808 is ----- pin IC

 ADC 0808 is ----- pin IC


  1. 40
  2. 20
  3. 24
  4. 24
discuss
ADC 0808 operates on single ---- power supply

ADC 0808 operates on single ---- power supply


  1. 5V
  2. 10V
  3. 15V
  4. 20V
discuss
total MCQs: 40

MCQs

40

Views

154

Best Answers

299

Points

5